Lights
Power
Busy
Error
Stacker
Ink
1
2
3
Stacker 1 is empty
Load discs into stacker 1.
Stacker 2 is empty
Load discs into stacker 2.
Stacker 1 is overloaded
Remove discs so that discs are below the red line.
Stacker 2 is overloaded
Remove discs so that discs are below the red line.
Stacker 3 is overloaded
Remove all the discs from stacker 3.
Stacker 2 is full
Remove published discs from stacker 2.
Stacker 3 is full
Remove published discs from stacker 3.
Conditions/Remedies
Note:
The Stacker lamp flashes when the source
stacker is out of discs; however, the timing of
the light flashing may not match the timing of
the stacker becoming empty.
Note:
The Stacker lamp flashes when the source
stacker is out of discs; however, the timing of
the light flashing may not match the timing of
the stacker becoming empty.
79
Troubleshooting