Connectable Models; Table 3.2 Connectable Models And Available Remote Interfaces - Fujitsu ETERNUS DX80 S2 User Manual

Disk storage system site planning

Hide thumbs Also See for ETERNUS DX80 S2:

Cli user's manual (756 pages)

User manual (186 pages)

User's manual & installation instructions (147 pages)

Table Of Contents

Table of Contents

Chapter 3 Connections

3.2 Remote Connections

The IPsec function is not supported for iSCSI interfaces. To use the IPsec function when performing a remote

copy with the ETERNUS DX90 S2, the ETERNUS DX410 S2/DX440 S2, or the ETERNUS DX8100 S2/DX8700 S2,

use a LAN switch that has the IPsec function.

3.2.2

Connectable Models

Remote copy is available for the ETERNUS DX90 S2. The ETERNUS DX90 S2 can be connected to not only the

same model, it can also be connected to the ETERNUS DX410 S2/DX440 S2, the ETERNUS DX8100 S2/DX8700

S2, and older ETERNUS Disk storage system models. The following table shows the models that can be

connected and the interfaces that are available.

Table 3.2

Connectable models and available remote interfaces

ETERNUS DX90 S2

ETERNUS DX410 S2/DX440 S2

ETERNUS DX8100 S2/DX8700 S2

ETERNUS DX90

ETERNUS DX410/DX440

ETERNUS DX8100/DX8400/DX8700

ETERNUS4000 models 400, 600

ETERNUS8000 models 800, 1200, 2200

ETERNUS4000 models 300, 500

ETERNUS8000 models 700, 900, 1100, 2100

ETERNUS6000

*1:

Firmware upgrade may be required to connect to the ETERNUS DX90 S2. For information about firmware versions,

contact your sales representative.

*2:

The transfer speed is 8Gbit/s or 4Gbit/s.

*3:

The transfer speed is 4Gbit/s.

*4:

The transfer speed is 4Gbit/s or 2Gbit/s.

*5:

Connections are available via switches. Direct connections are not supported.

*6:

The transfer speed is FC 2Gbit/s. Remote connections are available only when data is migrated.

Stack mode or Through mode can be used as the transfer mode.

ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Site Planning-

Connectable model (*1)

Remote interface

16Gbit/s

8Gbit/s

Available

(*2)

Available

(*2)

Available

(*2)

Available

(*3)

(*4)

Available

(*5) (*6)

(*6)

iSCSI 10Gbit/s

iSCSI

1Gbit/s

Available

—

P3AM-4822-12ENZ0

Table of Contents

This manual is also suitable for:

Eternus dx90 s2

Connectable Models; Table 3.2 Connectable Models And Available Remote Interfaces - Fujitsu ETERNUS DX80 S2 User Manual

Connectable Models

Related Manuals for Fujitsu ETERNUS DX80 S2

Related Content for Fujitsu ETERNUS DX80 S2

This manual is also suitable for:

Table of Contents