Table of Contents
Advertisement
References
Specifications
Table 9. LPe12000, LPe12002 and LPe12004 Specifications
Parameter
Media Interface
Physical Dimensions
Power Requirements
Airflow
Temperature
Humidity
LPe12000, LPe12002 and LPe12004 Hardware Installation Manual
The controller interfaces to the physical media through an FC-0 Media Interface
(FC-PI compliant transceiver), and then connects through dual optical fiber LC
connectors.
Low-profile MD2 form factor, 6.600 inches by 2.713 inches, and accommodates
both the full-height and low-profile bracket.
LPe12004
• 4.1 watts (typical) @ +3.3 V ±9%
• 4.7 watts (maximum) @ +3.3 V ±9%
• 15.3 watts (typical) @ +12 V ±8%
• 18.7 watts (maximum) @ +12 V ±8%
• 19.5 watts (typical) total
• 23.5 watts (maximum) total
LPe12002
• 1.7 watts (typical) @ +3.3 V ±9%
• 2.0 watts (maximum) @ +3.3 V ±9%
• 7.1 watts (typical) @ +12 V ±8%
• 11.3 watts (maximum) @ +12 V ±8%
• 8.8 watts (typical) total
• 13.3 watts (maximum) total
LPe12000
• 1.1 watts (typical) @ +3.3 V ±9%
• 1.3 watts (maximum) @ +3.3 V ±9%
• 5.8 watts (typical) @ +12 V ±8%
• 8.8 watts (maximum) @ +12 V ±8%
• 6.9 watts (typical) total
• 10.1 watts (maximum) total
Note: Due to differences in the SFP+ transceiver (short-wave vs. long-wave), the
power will be slightly higher by 100mW on the 3.3V for the long-wave product
150 lf/min (minimum)
32°F-131°F (0°C-55°C), Operating
-40°F-158°F (-40°C-70°C), Storage
5% to 95% non-condensing
Range
Page 9
Advertisement
Table of Contents
