Recovering From Manual Mode; Twain Screen Leading To Manual Mode - Epson Perfection User Manual

User's Manual Scanner Epson Perfection
When the scan is completed, a thumbnail of the scan will be added in the left column, and the
scanned image will be displayed in the middle area of the screen (Figure 14). All images must be
given a name. The AFHCAN software will automatically enter the word SCAN with a sequence
number. You can type in a different name manually. At this point, the selected scans can be
saved to the case by pressing the button. To discard all the currently displayed scans, press
Save
.
Back

1.1.3.2 Recovering from Manual Mode

As mentioned previously, manual mode is complex and is not recommended for routine scanning.
Details on manual mode are beyond the scope of this manual. However, if another user scans
with manual mode, you may encounter the TWAIN screens for manual mode when you do a new
scan. This is because the software remembers what mode was used last and opens the next
scanning session in the same mode. Clicking Cancel during preview brings up the screen show
in Figure 16. Clicking Manual Mode in Figure 16 brings up the screen in Figure 17.
Figure 16

TWAIN screen leading to manual mode

PUB-119 Rev B.doc 15