Casio DT-X7 Series User Manual page 66

1 Charge Indicator
LED
2 AC Adaptor Jack
3 Dual Battery
Charger
Connection Port
4 Connection
Bracket
Attachment Holes
5 Power Contacts
Important!
•
Allowing the power contacts become wet can cause an electric shock or fi re. In
addition, if the contacts become soiled, contact may be impaired resulting in
poor charging. For reasons of safety and maintaining charging battery pack(s)
in optimum condition, clean the power contacts by wiping with a dry cloth or
cotton swab after disconnecting the AC adaptor.
•
Although the battery may become warm during charging, this is normal and
does not indicate a malfunction.
•
Do not place objects such as a cover over the Dual Battery Charger while
charging.
•
Do not remove the battery pack or disconnect the AC adaptor during charging.
•
Repeated "Mounting and Removing" of battery pack in excess of times may
cause the quality deterioration of the battery pack.
•
Each Dual Battery Charger comes with one connection bracket.
Since only one connection bracket is required when you connect two Dual
Battery Chargers, you will always have one left over.
Simply keep the other connection bracket on hand as an extra, in case you ever
need it.
E-64
This LED indicates the charge status of the battery pack(s).
Off: Not charging
Red: Charging
Red Flashing: Battery pack problem
Green Flashing: Standby
Green: Charging complete
This is used to supply power by connecting the AC adaptor (sold
separately).
Use this port to connect multiple Dual Battery Chargers to each
other.
The connection bracket attaches here when you connect multiple
Dual Battery Chargers to each other.
Power is supplied to the Handheld Terminal via these contacts.