Connecting The Usb Cradle Power Supply - Casio DT-X7 Series User Manual

Connecting the USB Cradle Power Supply

Use the separately sold AC adaptor (AD-S42120BE) for the power supply of the
USB Cradle. Always make sure to connect the AC adaptor to the USB Cradle before
performing communication with the Handheld Terminal. Power to the Handheld
Terminal is supplied from the USB Cradle.
1. Plug the AC adaptor into the AC adaptor jack on the back of the USB Cradle.
2. After connecting the power cable to the AC adaptor, plug the other end of it into an
electrical outlet.
3. Use the selector switch on the left side of the USB Cradle to select the port to be used.
Set the switch to the "B" position when using the unit as a USB client, or set it to the "A"
position when using the unit as a USB host.
E-45