About This Manual - Fujitsu ETERNUS DX80 S2 User Manual

Organization
This document is composed of the following seven chapters and three appendices:
●
Chapter 1 Components
This chapter describes the components of the ETERNUS DX80 S2/DX90 S2 Disk storage system.
●
Chapter 2 Basic Operation
This chapter explains how to turn on and off the ETERNUS DX80 S2/DX90 S2 Disk storage system and how
to operate the FUNCTION button on the controller enclosure.
●
Chapter 3 Setup
This chapter describes the required settings for operation of the ETERNUS DX80 S2/DX90 S2 Disk storage
system and provides notes for setting up each function of the ETERNUS DX80 S2/DX90 S2 Disk storage
system.
●
Chapter 4 Operations
This chapter describes the control of the LAN for operation management of the ETERNUS DX80 S2/DX90 S2
Disk storage system, and the monitoring the status of the ETERNUS DX80 S2/DX90 S2 Disk storage system.
●
Chapter 5 Maintaining Optional Products
This chapter explains how to install optional products in the ETERNUS DX80 S2/DX90 S2 Disk storage
system.
●
Chapter 6 Maintenance
This chapter describes maintenance for the ETERNUS DX80 S2/DX90 S2 Disk storage system.
●
Chapter 7 Troubleshooting
This chapter explains troubleshooting when errors occur in the ETERNUS DX80 S2/DX90 S2 Disk storage
system.
"Event Notification Message
Operation Manager"
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
List", "Audit Log List", and
are described as appendices.
Copyright 2013 FUJITSU LIMITED

About this Manual

"Event (SNMP Trap) Display When Using ServerView
4
P3AM-4842-12ENZ0