Fujitsu ETERNUS DX80 S2 User Manual page 167

Appendix B Audit Log List
Event code
0206001A
0206001B
0206001C
0206001D
0206001E
0206001F
02060020
02060021
02060022
02060023
02060028
02060029
0206002A
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Upper: Message
Lower: Detailed information
Delete Port Group
$a
[Name= ]
Create Host Group
$a $b $c
[Name= No= Host= Host_Response=
Set Host Group
$a $b
[Name= New_Name= Host=
$d
Host_Response= ]
Delete Host Group
$a
[Name= ]
Set Host LU Qos mode
$a
[Mode= ]
Set LU QoS Group
$a $b $c
[No= [LUN= Limit= ]]
Delete LU QoS Group
$a
[No= ]
Set Port QoS
[Port= $a Limit= $b Event_No= $c
Set Host QoS
$a $b $c
[Host= Limit= Event_No=
Schedule_No= $d ]
Set LU QoS
$a $b
[Port= Host= Qos_Group=
Schedule_No= $e ]
Start Host LU QoS Performance
$a
[Port= ]
Stop Host LU QoS Performance
$a
[Port= ]
Set Host path State
[Port= $a Host= &b State= $c ]
Copyright 2013 FUJITSU LIMITED
The port group is deleted.
$a : Port group name
The host group is created.
$a : Host group name
$d
]
$b
: Host group number
$c : Host name
$d
: Host response name
The host group settings are changed.
$a
: Host group name
$c
$b
: New host group name
$c
: Host name
$d
: Host response name
The host group is deleted.
$a
: Host group name
The Host-LU QoS mode is enabled or disabled.
$a
: Host LU-QoS mode (Enable, Disable)
The LU QoS group is set.
$a
: LU-QoS group number
$b
: Host LUN
$c
: Band width limit (0 – 15)
The LU QoS group is deleted.
$a
: LU QoS group number
The bandwidth limit for the port is set.
$a
: Port number (example: 001 or "All")
Schedule_No= $d ]
$b
: Band width limit (0 – 15)
$c
: Event number (1 – 7)
$d
: Schedule number (0 – 2047 or "None")
The bandwidth limit for the host is set.
$a : Host name
$b
: Band width limit (0 – 15)
$c : Event number (1 – 7)
$d
: Schedule number (0 – 2047 or "None")
The bandwidth limit for the host LUN is set or
released.
$c $d
Event_No=
$a
: Port number (example: 001, 002)
$b
: Host name
$c
: LU QoS group number or "Clear"
$d
: Event number (1 – 7)
$e : Schedule number (0 – 2047 or "None")
Performance information collection for the Host-
LU QoS is started.
$a : Port number (example: 001, 002, or "All")
Performance information collection for the Host-
LU QoS is stopped.
$a : Port number (example: 001, 002, or "All")
The access settings from the host is changed.
$a
: Port number (example: 001, 002)
$b
: Host name
$c
: State (Online, Offline)
167
Description
P3AM-4842-12ENZ0