Chapter 6 Maintenance; Periodic Backup; Changing The Connection Destination (Host Bus Adapters) - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 6
This chapter describes maintenance for the ETERNUS DX Disk storage system.
6.1

Periodic Backup

In case of a system failure, important data should be regularly backed up.
6.2 Changing the Connection Destination
(Host Bus Adapters)
This section describes the required operations for changing the connection destination (Host Bus
Adapter, hereinafter referred to as "HBA") of the ETERNUS DX Disk storage system in order to
perform operations such as replacing a server or a HBA of the server after system operations
have started.
This section also provides various different procedural examples for changing HBAs. Refer to the
relevant part in this section.
• Replacing FC Cards
• Replacing LAN Cards / iSCSI HBAs
• Replacing SAS Cards
Note that this is only an overview of the replacement procedure. Refer to the relevant manuals
for more details.
• The manuals that are supplied with HBAs
• "User's Guide -Server Connection-"
• "ETERNUS Web GUI User's Guide"
• "ETERNUS CLI User's Guide"
If management software such as ETERNUS SF Storage Cruiser is installed, refer to the manuals
that are supplied with the management software and check the required settings.
Maintenance
Do
CAUTION
• We recommend that you backup important data regularly. If the
ETERNUS DX Disk storage system fails and the data has not been
backed up, it may be lost.
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Copyright 2013 FUJITSU LIMITED
75
P3AM-5512-05ENZ0