Installation Rules For Disks; Figure 5.1 Position Of 2.5" Disk Slots; Figure 5.2 Position Of 3.5" Disk Slots - Fujitsu ETERNUS DX60 S2 User Manual

Disk storage system
Hide thumbs Also See for ETERNUS DX60 S2:
Table of Contents

Advertisement

Chapter 5 Installing Optional Products
5.1 Installing Disks
IMPORTANT
5.1.1

Installation Rules for Disks

This section explains the installation rules for disks.
2.5" disks
2.5" disks can be installed in the front side of a 2.5" type controller enclosure.
Different types of disks can be installed in the same enclosure. Disks can be installed in any slots
of an enclosure.
Figure 5.1
Figure 5.1
3.5" disks
3.5" disks can be installed in the front side of a 3.5" type controller enclosure or a 3.5" type drive
enclosure.
Different types of disks can be installed in the same enclosure. Disks can be installed in any slots
of an enclosure.
Figure 5.2
Figure 5.2
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Firmware version V20L11 or later is required in the ETERNUS DX Disk
storage system to add disks.
The firmware version that is currently in use can be checked via ETERNUS
Web GUI or ETERNUS CLI. If an older firmware version is being used,
request a firmware upgrade from your sales representative.
shows the positions of 2.5" disk slots.
Position of 2.5" disk slots
Do Not
WARNING
System disks are installed in Slot#0 and Slot#1. Never remove system
disks. Doing so will render the ETERNUS DX Disk storage system
unusable.
shows the positions of 3.5" disk slots.
Slot#8
Slot#4
Slot#0
Position of 3.5" disk slots
Copyright 2013 FUJITSU LIMITED
Slot#9
Slot#10
Slot#5
Slot#6
Slot#1
Slot#2
56
Slot#11
Slot#7
Slot#3
P3AM-5512-05ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents