Chapter 2 Standard Operations; Powering On And Off; Switching On And Off The Main Line Switch On The Power Distribution Unit (For Regions Other Than Emea&I); Figure 2.1 On Position (Marked "|") Of The Main Line Switches On A 1U Power Distribution Unit - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 2
This chapter explains how to turn on and off the ETERNUS DX Disk storage system and how to
operate buttons on the operation panel.
2.1

Powering On and Off

This section explains how to turn on the ETERNUS DX Disk storage system.
2.1.1 Switching On and Off the Main Line Switch on the Power Distribution
Unit (for Regions Other than EMEA&I)
This section explains how to switch the main line switch of the power distribution unit to ON and
OFF.
■
To switch to ON
Turn the main line switch of the power distribution unit to the "On" position (marked "I").
IMPORTANT
●
For 1U power distribution unit
Figure 2.1
Standard Operations
Make sure all of the main line switches are in the ON position.
Main line switch
ON position (marked "|") of the main line switches on a 1U power distribution unit
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Copyright 2013 FUJITSU LIMITED
30
P3AM-5512-05ENZ0