Figure 1.21 3.5" Disk; Figure 1.22 Disk Slot Numbers (Drive Enclosure) - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 1 Components
1.2 Drive Enclosures
Table 1.8
POWER
READY
FAULT
IDENTIFY
■
Disk

Figure 1.21 3.5" disk

Figure 1.22

Figure 1.22 Disk slot numbers (drive enclosure)

●
Part explanation
• LEDs
The states of LEDs are listed below.
Table 1.9
DISK READY/
FAULT
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Status and meanings of each LED (in front of drive enclosure)
LED name LED status
(green)
(green)
(orange)
(blinks orange)
(blinks blue)
(off)
DISK READY/FAULT LED
shows the slot number of each disk.
Slot#8 Slot#9
Slot#4 Slot#5
Slot#0 Slot#1
Status and meanings of each LED (3.5" disks)
LED name LED status
(green)
(blinks green)
(orange)
Copyright 2013 FUJITSU LIMITED
Drive enclosure status
DC power is supplied to the drive enclosure.
The ETERNUS DX Disk storage system is available for
use.
The drive enclosure is in error status.
A part of the drive enclosure requires preventive
maintenance.
As ordered via ETERNUS Web GUI, the installation
location of the drive enclosure is identified.
Slot#10 Slot#11
Slot#6 Slot#7
Slot#2 Slot#3
The disk is operating normally.
The disk is in error status.
25
Disk status
P3AM-5512-05ENZ0