Package Contents - Fujitsu ETERNUS DX80 S2 Manual

Package Contents

Check the list of package contents for the purchased product to confirm that no items are missing. Tick off the checkbox of each
confirmed item.
If there is a missing item, contact your sales representative.
Store the package contents in a safe and secure location, as they may be needed again when making changes to the system or
●
reinstalling the software.
Note that the package may sometimes also contain an Errata sheet and/or other such unlisted documentation.
●
ETERNUS DX80 S2 (2.5inch) (Product ID: ET082
ETERNUS DX80 S2 (3.5inch) (Product ID: ET082
ETERNUS DX90 S2 (2.5inch) (Product ID: ET092
ETERNUS DX90 S2 (3.5inch) (Product ID: ET092
□ Controller enclosure (x 1)
Drives that are purchased at the same time as the ETERNUS DX Disk
storage system are preinstalled according to the installation rules.
●
2.5inch
● 3.5inch
□ Flange cover (x 1)
□ Rack rail kit
□ Rack rail (x 1 set)
□ Plate (x 2)
□ M5 screw (x 4)
for mounting the enclosure
*1: An alphanumerical character is used for
D : dual-controller type
S : single-controller type
An alphanumerical character may also be used for
a
a
a
a
□ Bracket (x 2)
□ Washer (x 8)
□ M5 screw (x 8)
for attaching the rack rails
a
to indicate the ETERNUS DX Disk storage system model.
b
depending on the purchased product.
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2013 FUJITSU LIMITED
(*1)
C b U )
(*1)
D U )
b
(*1)
C U )
b
(*1)
D U )
b
□ AC200V cable (x 2)
IEC60320-C13↔NEMA L6-15P (4m)
□ Pin (x 1)
Used to push the FUNC TION button of the controller
enclosure.
□ Label
□ Destination label (x 1)
for the QSFP cable
□ Read Me First (this document) (x 1)
□ Safety Precautions (x 1)
□ Documentation CD (x 1)
3
□ Network Settings label (x 1)
:
: . . .
: . . .
:
□ DE_No. label (x 1)
P3AM-4872-11EN