KitchenAid 720-0787 Installation Instructions And Use & Care Manual page 12

3. Secure the rear panel (D) by clipping the open hole onto the
screws which are pre-assembled the bottom panel and the left
side panel. Tighten the 3 screws to the side panel.
4. Secure the right side panel (C) by clipping the open hole onto
the screws which are pre-assembled to the bottom panel and rear
panel and tighten the remaining 8 screws.
12
D
C C
Tighten all screws to
secure panels.
5. Place the cart frame in position with notch facing up and to
the right. Remove the top screw and loosen the bottom screw
for the left and right side of the frame. Remove the screws on
the inside front of the side panels. Align the notches in the side
panels with the screws in the cart frame. Screw the 2 top
screws into the cart frame and the 2 screws into the inside of
the side panels that were previously removed. Tighten all 6
screws.
Remove the top
screw and loosen
the bottom screw
Notch facing up
on the right side
6. Remove 4 screws pre-assembled on the door (E) as shown
below.
Screw the top screw
and the screw
removed on inside
side panel.
E