Get Started; Charge Power; Charge Through A Usb Ac/Dc Adapter; Switch The Player On Or Off - Philips Go GEAR SA4VBE04 User Manual

Philips go gear audio player user manual
Hide thumbs Also See for Go GEAR SA4VBE04:
Table of Contents

Advertisement

3 Get started

Charge power

VIBE has a built-in battery that can be charged
through the USB socket of a computer.
Connect VIBE to a PC by using the USB cable.
Note
When you connect VIBE to a computer, you are briefly
prompted to select: [Charge & transfer] or [Charge
& play].
VIBE automatically applies [Charge & transfer], if no
new selection is made.
Battery level indication
When the battery is low, the low battery
screen is displayed repeatedly.
When the charging process is complete,
is displayed.
Note
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
Charge through a USB AC/DC
adapter
To charge VIBE through a USB AC/DC adapter
(not supplied), make sure that the power
output is 5.0 V and 0.5A.

Switch the player on or off

Press and hold
until the player is switched
on or off.

Automatic standby and shut-down

The player has an automatic standby and shut-
down feature that can save battery power.
After 5 minutes in idle mode (no play, no
button is pressed), the player switches off.
EN
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gogear sa4vbe08Gogear sa4vbe16Gogear sa4vbe04

Table of Contents