Automatic Rinse/Self-Cleaning Cycle - Philips Saeco Minuto HD8772 User Manual

2 Press the " " button to start the cycle. The machine starts the auto-
matic priming of the circuit by dispensing some water through the
steam wand.
3 The bar under the icon shows the operation progress. When the pro-
cess is completed, the machine stops dispensing automatically.
4
Then the control panel shows the machine warm-up icon.

Automatic Rinse/Self-Cleaning Cycle

When warm-up is complete, the machine automatically performs a rinse/
self-cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
1 Place a container under the dispensing spout to catch the small
amount of water which will be dispensed.
2 The machine shows this display. Wait for the cycle to fi nish automati-
cally.
Note:
You can stop dispensing by pressing the "
3
When the above steps are complete, the machine shows this display.
You can now perform the manual rinse cycle.
ENGLISH
" button.
9 9