Advertisement
QuickSpecs
Overview
Manager and operator privilege levels
enable read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces
Command authorization
leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit
trail
Secure Web GUI
provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
Multiple configuration files
can be stored to the flash image
Complete session logging
provides detailed information for problem identification and resolution
SNMPv1, v2c, and v3
facilitate centralized discovery, monitoring, and secure management of networking devices
Remote monitoring (RMON)
uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private
alarm extension group
Local and Remote Intelligent Mirroring
mirrors traffic from a switch port or to a remote switch port anywhere on the network, or mirrors ACL-selected traffic to a local
switch port
Management VLAN
segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and SNMP
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network
management applications
Device Link Detection Protocol (DLDP)
monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, preventing network
problems such as loops
sFlow (RFC 3176)
provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this
allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-
time network monitoring purposes
IPv6 management
future-proofs networking, as the switch is capable of being managed whether the attached network is running IPv4 or IPv6;
supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and RADIUS for IPv6
Troubleshooting
ingress and egress port monitoring enable network problem solving; virtual cable tests provide visibility into cable problems
Connectivity
IPv6
Telnet
for allowing CLI access via IPv6
SNMP
for IPv6 switch management
DNS
for IPv6 host management
DHCP
for auto IPv6 address configuration of a switch
Auto-MDIX
provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
DA - 13790 North America — Version 9 — December 18, 2013
HP 3600 EI Switch Series
Page 2
Advertisement
