Download Print this page

Countdown Timer; Stopwatch; Alarm Operation - Casio 3198 Operation Manual

Advertisement

Operation Guide 3198/3299
To set an alarm time
1. In the Alarm Mode, use D to scroll through the alarm
screens until the alarm number you want to set is
displayed.
2. After you select an alarm, hold down A until the hour setting of the alarm time
starts to flash, which indicates the setting screen.
• This operation turns on the One-time Alarm automatically.
E-20

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in.
• Alarm and Hourly Time Signal operations are performed in accordance with the
Timekeeping Mode time.
• To stop the alarm tone after it starts to sound, press any button.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
E-22
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select the Hourly Time
Hourly time signal
Signal.
on indicator
2. Press A to toggle it on and off.
• The Hourly Time Signal on indicator is shown on the
display in all modes while this function is turned on.
E-24
To configure the countdown timer
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down A until the current
countdown start time starts to flash, which indicates the
setting screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
3. When the setting you want to change is flashing, use D (+) and B (–) to change
the flashing item.
• To specify a countdown start time of 24 hours, set
4. Press A to exit the setting screen.
E-26

Stopwatch

The stopwatch lets you measure elapsed time, split times,
Seconds
and two finishes.
• The display range of the stopwatch is 23 hours,
59 minutes, 59.99 seconds.
• The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
• The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
• Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
• All of the operations in this section are performed in the
Hours
Minutes
Stopwatch Mode, which you enter by pressing C
1/100 second
(page E-5).
E-28
Hours
Minutes
Seconds
.
3. Press C to move the flashing in the sequence shown below to select other settings.
Hour
One-time Alarm/Daily Alarm Selection
4. While a setting is flashing, use D and B to change it as described below.
Screen
To do this:
Do this:
Use D (+) and B (–).
Change the hour
and minutes.
• With the 12-hour format, set the time correctly as
a.m. or p.m. (PM indicator).
Press D.
Toggle between
/
One-time Alarm
One-time Alarm on:
and Daily Alarm.
Daily Alarm on:
5. Press A to exit the setting screen.
To turn an alarm on and off
1. In the Alarm Mode, use D to select an alarm.
2. Press A to cycle through the alarm settings as shown below.
Alarm Off
One-Time Alarm
On
• In all modes, the alarm on indicator is shown for the alarm that is currently turned
on.
• The alarm on indicator flashes while the alarm is sounding.

Countdown Timer

The countdown timer can be set within a range of one
Seconds
second to 24 hours. An alarm sounds when the
countdown reaches zero.
• All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-5).
Hours Minutes
1/10 second
To use the countdown timer
Press D while in the Countdown Timer Mode to start the
countdown timer.
• When the end of the countdown is reached, the alarm
sounds for ten seconds or until you stop it by pressing
any button. The countdown time is reset to its starting
value automatically when the alarm sounds.
• Press D while a countdown operation is in progress to
pause it. Press D again to resume the countdown.
• To stop a countdown operation completely, first pause it
(by pressing D), and then press A. This returns the
countdown time to its starting value.
To measure times with the stopwatch
Elapsed Time
Start
Stop
Re-start
Split Time
Start
Split
Split release
(SPL displayed)
Two Finishes
Start
Split
Stop
First runner finishes.
Second runner
Display time of first
finishes.
runner.
Minutes
E-21
Daily Alarm On
E-23
E-25
E-27
Stop
Clear
Stop
Clear
Split release
Clear
Display time of
second runner.
E-29

Hide quick links:

Advertisement

loading

This manual is also suitable for:

3299