GE Monogram ZVB30BN Dimensions And Installation Information

ZVB30SN/BN
GE Monogram
Dimensions and Installation Information (in inches)
All 30" models are equipped with a separate raise/lower
ZVB30SNSS
switch. The switch must be installed in a separate location
outside of the vent and cooktop cutout.
Countertop Requirements
Countertops must have a deep flat surface to accommodate
the cooktop and the vent. Countertops with a rolled edge and
backsplash may not provide the flat surface area required.
Base Cabinet Requirements
The base cabinet must be deep enough to accommodate the
minimum clearance to the front edge of the countertop, the
cooktop burner box and the vent.
Downdraft Vent and Cooktop Cutout
The installation of these downdraft vents with any Monogram
cooktop requires careful consideration. For accurate planning,
review the individual dimension drawings for the combined vent
and Monogram cooktop installation.
Before you begin you must:
1. Review countertop dimension illustrations to be sure you will
have enough flat countertop surface depth.
2. Check to be sure that the total countertop depth required
(including minimum cutout to front edge depth) allows enough
space for a backsplash.
3. Review the cabinet illustration. Check to be sure that the
interior cabinet depth will house the cooktop burner box, the
vent and the cutout clearance from the front.
4. When countertop and cabinet depth present a problem, review
Creative Solutions.
5. Carefully review the installation instructions packed with
product or available online at www.monogram.com.
With careful planning you can achieve a custom look with
minimal adjustments.
For answers to your Monogram,
GE appliance questions, visit our website at
®
ge.com or call GE Answer Center
800.626.2000.
30" Telescopic Downdraft Vents
®
Separate Raise/
Lower Switch
GE Profile or
® ™
service,
®
Specification Created 11/08
Listed by
Underwriters
Laboratories
130677