Install A New Windows Xp - Foxconn H61MXV Series User Manual

5-4 Install a New Windows XP

!
hen you set the SATA Mode in BIOS to either AHCI or RAID, you need to
W
follow these steps to install your Windows XP system.
1. Press <DEL> to enter BIOS Setup during POST.
2. Insert the Windows installation CD into the optical drive.
3. Set the "Boot Option #1" to "SATA: ATAPI DVD ...", save changes and exit the BIOS
setup.
Main Advanced Chipset Boot Power Health Security Save & Exit
Boot Configuration
Bootup Numlock State
Quiet Boot
CSM16 Module Version
Boot Option Priorities
Boot Option #1
CD/DVD ROM Drive BBS Priorities
4. The computer will reboot, and it will start installing Windows Operating System.
Watch the screen carefully, when the following picture appears, press <F6> key
immediately. If you forgot to do this, PC will go to an fatal blue screen, and you
may need to reboot the system again. PC may not respond to your <F6> input
immediately, and it keeps loading files until the next screen displays.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Boot
[On]
[Enabled]
07.64
[SATA: ATAPI DVD ...]
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Select the keyboard NumLock
state
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
102