Understanding the printer menus
Use
Spot Color Replacement
Color Adjust
Utilities menu
Use
Activate Hex Trace
Coverage Estimator
Off
On
XPS menu
Use
Print Error Pages
Off
On
PDF menu
Use
Scale to Fit
Yes
No
Annotations
Do Not Print
Print
To
Assign specific CMYK values to named spot colors.
Note: This menu is available only in the Embedded Web Server.
Initiate a recalibration of color conversion tables and allow the printer to make
adjustments for color variations in output.
Notes:
•
Adjusting color starts when the menu is selected. Adjusting color appears
on the display until the process is finished.
•
Color variations in output sometimes result from changeable conditions such as
room temperature and humidity. Color adjustments are made on printer
algorithms. Color alignment is also recalibrated in this process.
To
Assist in isolating the source of a print job problem.
Notes:
•
When activated, all data sent to the printer is printed in hexadecimal and
character representation, and control codes are not executed.
•
To exit or deactivate Hex Trace, turn off or reset the printer.
Provide an estimate of the percentage coverage of toner on a page. The estimate is
printed on a separate page at the end of each print job.
Note: Off is the factory default setting.
To
Print a page containing information on errors, including XML markup errors.
Note: Off is the factory default setting.
To
Scale page content to fit the selected paper size.
Note: No is the factory default setting.
Print annotations in a PDF.
Note: Do Not Print is the factory default setting.
78