Lexmark CS310n User Manual page 21

Cs310 series
Hide thumbs Also See for CS310n:
Table of Contents

Advertisement

Additional printer setup
Security Method—There are four basic options for Security Method:
WEP key
If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key
currently in use on the network by selecting the default WEP transmit key.
WPA or WPA2 preshared key or passphrase
WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set
for the same type on the router and on the printer, or the printer will not be able to communicate on the
network.
802.1X–RADIUS
If you are installing the printer on an 802.1X network, then you may need the following:
Authentication type
Inner authentication type
802.1X user name and password
Certificates
No security
If your wireless network does not use any type of security, then you will not have any security information.
Note: We do not recommend using an unsecured wireless network.
Notes:
If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility
of the computer network adapter, and then look for the network name. If you cannot find the SSID or the
security information for your network, then see the documentation that came with the access point, or contact
your system support person.
To find the WPA/WPA2 preshared key or passphrase for the wireless network, see the documentation that
came with the access point, see the Embedded Web Server associated with the access point, or consult your
system support person.
Connecting the printer to a wireless network using Wi‑Fi Protected Setup
Before connecting the printer to a wireless network, make sure that:
The access point (wireless router) is Wi‑Fi Protected Setup (WPS) certified or WPS‑compatible. For more
information, see the documentation that came with your access point.
A wireless network adapter installed in your printer is attached and working properly. For more information, see
the instruction sheet that came with the wireless network adapter.
Using the Push Button Configuration method
1
From the printer control panel, navigate to:
> Network/Ports >
Setup >
> Start Push Button Method >
2
Follow the instructions on the printer display.
> Network [x] >
> Network [x] Setup >
> Wireless >
> Wi‑Fi Protected
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs310dn

Table of Contents