Asus P9D WS User Manual page 42

Table of Contents

Advertisement

2.
USB 2.0 connectors
(Type A: 10-1 pin USB910/ USB1112; Type B: USB13)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and
then install the Q-Connector (USB) to the USB connector onboard if your chassis supports
front panel USB ports.
2-24
Chapter 2: Hardware information

Advertisement

Table of Contents
loading

Table of Contents