Notes
• When the selected Program Type is not found, “NO PTY”
appears. Select another Program Type.
• The operation ends automatically if you do not operate
within 30 seconds.
6.4 Changing the analog radio
settings
You can change an analog radio setting item(s)
according to your listening preference.
1
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
2
SETTINGS
Turn the volume knob to select
,
then press the knob.
3
Turn the volume knob to select a desired
setting item, then press the knob.
- See table below for selection.
- Press [ 6 ] to return to the previous item.
4
Press and hold [6] to exit.
Item
Description
LOCAL SEEK
ON: Searches only FM stations with good reception. ;
†
OFF: Disables search function.
SEEK MODE
Sets the tuning mode.
AUTO1: Automatic search for a station. ;
AUTO2: Search in order of the stations in the preset
memory. ;
MANUAL: Normal manual tuning.
PTY SEARCH
Refer to
<6.3 PTY (Program Type)> (page
18).
†
LANG SELECT
Select the language to be used for DAB source “ASW
†
SELECT”/ “PTY SEARCH”/ “PTY WATCH”, and TUNER
source “PTY SEARCH”.
ENGLISH/ FRENCH/ GERMAN
AUTO MEMORY Refer to
<6.2 Auto memory> (page
18).
MONO SET
ON: Improves the FM reception (but the stereo effect
†
may be lost). ; OFF: Does not improve FM reception
but resumes stereo effect.
TI
ON: Temporarily switches to Traffic Information. ;
†
OFF: Does not switch to Traffic information.
(Not applicable if “MW/LW” is selected)
NEWS SET
00M – 90M: Sets the time for receiving the next
†
news bulletin. ; OFF: Cancels.
AF SET
ON: Automatically searches for another station
†
broadcasting the same program in the same Radio
Data System network with better reception when the
current reception is poor. ;
OFF: Disables search.
REGIONAL
ON: Switches to another station only in the specific
†
region using the “AF” control. ;
OFF: Disables search.