Editing Ip Rule Set Entries - D-Link NetDefend DFL-210 User Manual

3.5.4. Editing IP rule set Entries

Using Reject
In certain situations the Reject action is recommended instead of the Drop action because a polite
reply is required from NetDefendOS. An example of such a situation is when responding to the
IDENT user identification protocol.
3.5.4. Editing IP rule set Entries
After adding various rules to the rule set editing any line can be achieved in the Web-UI by right
clicking on that line.
A context menu will appear with the following options:
Edit
Delete
Disable/Enable
Move options
This allows the contents of the rule to be changed.
This will remove the rule permanently from the rule set.
This allows the rule to be disabled but left in the rule set. While disabled the
rule set line will not effect traffic flow and will appear grayed out in the user
interface. It can be re-enabled at any time.
The last section of the context menu allows the rule to be moved to a
different position in the rule set and therefore have a different precedence
76
Chapter 3. Fundamentals