Setting Up An Access Rule - D-Link NetDefend DFL-210 User Manual

Network security firewall ver 2.26.01
Hide thumbs Also See for NetDefend DFL-210:
Table of Contents

Advertisement

6.1.3. Access Rule Settings
problems in case a rule is preventing some other function, such as VPN tunnel establishment, from
working properly.
Example 6.1. Setting up an Access Rule
A rule is to be defined that ensures no traffic with a source address not within the lannet network is received on
the lan interface.
Command-Line Interface
gw-world:/> add Access Name=lan_Access Interface=lan
Web Interface
1.
Go to Rules > Access
2.
Select Access Rule in the Add menu
3.
Now enter:
Name: lan_Access
Action: Expect
Interface: lan
Network: lannet
4.
Click OK
Network=lannet Action=Expect
206
Chapter 6. Security Mechanisms

Advertisement

Table of Contents
loading

Table of Contents