Download  Print this page

Honeywell CT30 Owner's Manual page 3

Low-voltage thermostat
Hide thumbs


CT30/CT33 Low-voltage Thermostat
Label wires and remove old wallplate
Use a screwdriver to disconnect wires one by one.As you disconnect each wire,
wrap it with the label matching the letter on your old thermostat. (Adhesive labels
are supplied in your thermostat package.)
Remove the old wallplate only after all wires are labeled. Be careful not to let
loose wires fall into the wall opening.
Wrap supplied labels securely around each wire
Do not let wires fall into wall opening!
IGNORE WIRE COLORS: Use only letter designations
to identify wire types.
Mark mounting position
1 Level base or cover plate
if desired.
2 Mark positions of
both screw holes.



  Also See for Honeywell CT30

  Related Manuals for Honeywell CT30

This manual is also suitable for: