Download Print this page

Kenmore 66515751791 Installation Instructions Manual Page 8

Hide thumbs

Advertisement

STEP 8 POSITION DISHWASHER UNDER COUNTERTOP
• Check to be sure that wires are secure under the dishwasher
and not pinched or in contact with door springs or other
dishwasher components.
TIP: Check tub insulation blanket, if equipped. It should be
positioned so it is not bunched up or interfering with door
springs. Check by opening and closing the door.
• Push dishwasher into cabinet. The front corners of the
dishwasher door should be flush with cabinet doors. Be
careful not to dent front panels with knees or damage
countertop or cabinets with dishwasher parts.
STEP 9 LEVEL DISHWASHER
IMPORTANT
level for proper dish rack operation and wash performance.
• Place level on door
and rack track inside
the tub as shown to
check that the
dishwasher is level.
Check
Level
Front
to Back
Figure Q
Installation Instructions
Dishwasher must be
Check
Level
Side
To Side
Do Not Push Against
Front Door Panel With
Knee. Damage to The
Door Panel Will Occur.
Figure P
• Level the dishwasher by
adjusting the four leveling
legs individually.
TIP: Pull lower rack out, about halfway. Check to be sure the rack
does not roll forward or back into dishwasher. If the rack rolls in
either direction, the dishwasher must be leveled again.
• If door hits the tub, the dishwasher is not installed correctly.
Adjust leveling legs to align door to tub.
8
Reposition Dishwasher
by Grasping Both
Sides With Hands
Turn Legs
to Adjust
Figure R

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: