Local Network - D-Link DSL-2750U User Manual

It displays the current wireless settings and you can manually enter the settings in
the wireless device that's to be added to the wireless network.
4.2.4.3 Manual Wireless Setup
If you want to configure the Internet settings of you new D-Link Router manually,
click Manual Wireless Connection Setup. It will redirect to 4.3.1 Wireless
Settings.
4.2.4.4 Wireless WPS
In the Wireless Connection page, Click Reset to Un-configured, the page
shown in the following figure appears.
Once the "Reset to Un-configured" button is clicked, the "wireless settings" will be
reset to factory default, other settings will remain unchanged.

4.2.5 Local Network

You can configure the LAN IP address according to the actual application. The
preset IP address is 10.0.0.2. You can use the default settings and DHCP service
to manage the IP settings for the private network. The IP address of the device is
the base address used for DHCP. To use the device for DHCP on your LAN, the IP
address pool used for DHCP must be compatible with the IP address of the device.
DSL-2750U User Manual
32