Bosch IntuiKey Keyboard User Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Keyboard
  5. IntuiKey
  6. User manual
Bosch IntuiKey Keyboard User Manual

Bosch IntuiKey Keyboard User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

IntuiKey Keyboard
Keyboard
Version 1.92
en
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Bosch IntuiKey Keyboard

Summary of Contents for Bosch IntuiKey Keyboard

  • Page 1 IntuiKey Keyboard Keyboard Version 1.92 User Manual...

  • Page 3: Table Of Contents

    Introduction to the IntuiKey Keyboard Series Operating the IntuiKey Keyboard The Status Display The Keypad The Softkeys and the Softkey Display The Joystick Navigating the System with the IntuiKey Keyboard 1.6.1 General Guidelines for Navigating the IntuiKey Menus 1.6.2 The Product Selection Menu 1.6.3 Selecting a Device for Control 1.6.4...
  • Page 4 | Table of Contents IntuiKey Keyboard F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security Systems, Inc.

  • Page 5: Introduction To The Intuikey Keyboard Series

    Introduction to the IntuiKey Keyboard Series | en Introduction to the IntuiKey Keyboard Series This manual contains all the information necessary to operate the IntuiKey Keyboard. Step-by- step procedures, illustrations, and sample menus guide you through each phase of IntuiKey operation.

  • Page 6: The Status Display

    | Introduction to the IntuiKey Keyboard Series IntuiKey Keyboard The Status Display The Status Display changes dynamically to display pertinent information about the keyboard’s present mode of operation. Typically, its information conveys one of two keyboard operating modes: Normal Mode or Error Code.

  • Page 7: The Keypad

    Softkeys/Softkey Display) selects the device under the control of the keyboard. The Product Selection menu also provides access to the Keyboard Control menu. MON functioning depends on the IntuiKey Model and device under control. For KBD-Universal keyboards, MON allows entry of a Monitor Number when controlling an Allegiant Switcher.

  • Page 8: The Joystick

    1.6.2 The Product Selection Menu The Product Selection menu lists the devices that are in communication with the IntuiKey. When using Divar XF, Divar MR, and Divar Easy up to two (2) devices will be displayed. If using Divar Series 1 or 2, up to 12 devices can be shown on a single screen. When more than 12 devices are connected, the arrow softkeys at the bottom of the screen can be used to scroll through the additional menu(s).

  • Page 9: Selecting A Device For Control

    Introduction to the IntuiKey Keyboard Series | en NOTICE! When the IntuiKey is first connected up to a device, or whenever a new video device is added to an existing system, enter the Product Selection menu and press the PROD key.

  • Page 10: Alarm/Alert/Action Indication

    ALERT added. The present product is displayed for two seconds, while the alarmed product is displayed for 0.5 seconds. NOTICE! This functionality is not supported when the IntuiKey is operating in Terminal Mode. F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.

  • Page 11: Controlling Allegiant Series Video Switchers

    Lockout Script Program Camera Sequence Control Alarm User Control Functions Load ADIM Sequence Controls Hold Start Sequence Sequence <Previous <Sequence Sequence> <Step Step> Figure 2.2 Allegiant Main Control Menu Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12...

  • Page 12: Programming And Controlling Allegiant Functions

    If the camera is locked, the display shows an RL in the monitor’s on-screen status display, indicating that the remote device is locked. If the camera is unlocked, RL is removed. To exit the Device Lockout menu press EXIT. F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.
  • Page 13 MA (Monitor Armed). – Disarm Monitor Pressing the Disarm Monitor softkey disarms the monitor currently controlled by the keyboard, thus prohibiting the monitor from responding to alarms. Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12...
  • Page 14 – Delete from Here to End Deletes all remaining steps after the step presently displayed on the OSD. F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.
  • Page 15 USER LOG ON, and the status display changes back to the default mode (i.e. camera and monitor numbers replaced with dashes). This mode times out in approximately two seconds and reverts to the previous menu. Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12...
  • Page 16 OR press the * key for the STAR only command (i.e. Allegiant command script, 0000). NOTE: The Command Script menu can be customized with specific scripts and submenus using the optional IntuiKey PC software package. Refer to the documentation included with the software for more specific instructions.
  • Page 17 If an attempt to use a User Function results in an error message, please consult your Allegiant system manual to determine if the function is supported in your particular model. Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12...

  • Page 18: Allegiant User Function Menus

    Allegiant User Function # Access Level Menu 20 Display User #/Priority Menu 20 Change User Password Menu 20 Show Keyboard Port # Menu 20 Keyboard Audio Menu 20 Display Battery Status F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.
  • Page 19 Cache Remote Cameras Menu 24 Auto Phase Adjustment Notes: When using LTC 8900 systems, the access levels required are 1 to 63. Password is required to change this setting. Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12...

  • Page 20: Allegiant Error Messages

    A request was made to load a RELATIVE type sequence on a monitor number that is too high; the monitors used by the sequence would extend past the highest monitor. Try switching to a lower monitor number before loading the sequence. F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.
  • Page 21 Error 96 * (STAR) Undefined The * key has been pressed, but there is no definition for this button. Error 128 No Communications The keyboard cannot communicate with the Allegiant. Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12...
  • Page 22 | Controlling Allegiant Series Video Switchers IntuiKey Keyboard F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.

  • Page 23: Controlling Divar Series Digital Video Recorders

    Add Scene to Tour – Aux On – Camera Functions – Advanced Menu – Show Shot – Preset Scene Control – Remove Scene from Tour – Aux Off DVR Control – Menu Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12...

  • Page 24: Accessing The Divar Main Control Menu

    Product Selection Menu. Depending on the number of DVRs that are connected to the IntuiKey, the list may show a single device name or up to 32 device names spanning three (3) menu screens when using Divar Series 1 and 2.

  • Page 25: Programming/Controlling Dvr Functions

    ZOOM – Indicates that the DVR is displaying a zoomed image. – ALM xx – Indicates that a device connected to the IntuiKey with address number xx is currently in alarm. The IntuiKey’s alarm button will light and the keyboard will begin to beep.
  • Page 26 Cameras may be assigned to any selected cameo, and may be changed as often as required. The IntuiKey’s numeric entry field title will change to cameo while the DVR is in this mode. Press the cameo softkey again to exit the mode.
  • Page 27 Controlling Divar Series Digital Video Recorders | en – Play Activates DVR playback mode and displays the PLAY indicator in the IntuiKey status display. Press the softkey again to cancel the playback mode. While in the Playback mode, the joystick functions as follows: Move joystick forward or rotate the joystick knob in the clockwise direction to put the DVR into forward playback mode.

  • Page 28: Dvr On-Screen Menu Controls

    Help screen, or to exit the on- screen menu completely without saving. Restores defaults in the active on-screen menu. Select Selects an on-screen menu or submenu item and saves selections made in menus. F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.

  • Page 29: Dvr Control Menu

    To change the current User Level, press the softkey to enter the password entry mode. Enter the keyboard password (refer to Appendix C) within 2 seconds. Select the desired User Level as listed on the softkey menu. NOTICE! The selected User Level applies to all DVR devices connected to the IntuiKey. – Help Accesses the DVR’s on-screen Help menu.

  • Page 30: Dvr Error Messages

    Invalid Keyboard Entry An invalid number has been entered on the keyboard. Error 3 Invalid DVR Number A DVR number less than 1 or greater than 30 was entered. Error 4 DVR Not Found No DVRs found during search. F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.

  • Page 31: Controlling System4 Video Multiplexers

    Press PROD to put the keyboard in the Product Selection Mode. The softkey display shows the Product Selection menu. Depending on the number of devices that are connected to the IntuiKey, the list may show up to 32 total devices spanning 3 menu screens.

  • Page 32: Programming/Controlling Mux Functions

    – 6-channel: 5+1 – 9-channel: 4+3, 3x3 – 16-channel: 4+3, 8+2, 12+1, 3x3, and 4x4 NOTICE! Pressing the multiscreen softkey multiple times cycles through the possible selections. F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.
  • Page 33 Cameras may be assigned to any selected cameo, and may be changed as often as required. The Intuikey’s numeric entry field title will change to Cameo while the DVR is in this Mode. Press the Cameo softkey again to exit the mode.
  • Page 34 Refer to Appendix B at the back of this manual for details on the Camera Commands. MUX Control Accesses a menu allowing control of additional multiplexer functions. Exit On-screen Quick Menu Keys Find Select MUXes User Level Audio Figure 4.5 MUX Control Submenu F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.
  • Page 35 (2) seconds. Select the desired User Level, as listed on the softkey menu. Note that the selected User Level applies to all multiplexer devices connected to the IntuiKey. Quick Keys Allows access to the multiplexer’s quick key commands. If the current user...

  • Page 36: Mux Error Messages

    Select MUX Pressing this softkey displays a short message on the softkey display indicating that entry of a multiplexer address is required. The IntuiKey status display changes to the Address Multiplexer screen. Upon entering an Allplex number, press ENTER. The keyboard determines whether the selected multiplexer is present.

  • Page 37: Intuikey Menu Reference

    IntuiKey Keyboard | en IntuiKey Menu Reference Product Table ALLEGIANT Allegiant MAIN Keyboard Diagnostics Terminal Mode MUX Main Terminal Keyboard Control Exi t Exit Record Ful l Factory Firmware Screen Play Reset Upgrade (User Quad Protocol Screen ZOOM RS-485 Defined...
  • Page 38 Cameras Verbosity Printer Address Port Mode Mode Select Cache Remote Crosspnt. Cameras Data Auto Phase Interface Adjustment <Previous Next> <Menu Menu> < > Figure A.2 Keyboard Menu Structure, continued F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.
  • Page 39 Driver Misc . C a mera C ommands C ommands Exit Fast Fast Address Address Display Fast Address Unassigned Aux On Aux Off Figure A.3 Keyboard Menu Structure, continued Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12...
  • Page 40 | IntuiKey Keyboard F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.

  • Page 41: B Camera Control Command Reference

    | en Camera Control Command Reference The IntuiKey Keyboard provides access to the camera control functions for applicable system devices. Certain features may be restricted by the AutoDome security feature. Refer to Appendix D for additional details. The Camera Control Main menu is shown below. The command descriptions follow.
  • Page 42 – Advanced Menu Press this softkey to enter the main on-screen programming menu of G3 and Day/Night Series AutoDomes having firmware of 2.0 or higher. F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.
  • Page 43 See the individual device control section for details of the Camera Functions menu. NOTICE! If ENTER is held down, the Aux command auto-repeats until the key is released. Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12...
  • Page 44 | IntuiKey Keyboard F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.

  • Page 45: C Keyboard Camera Commands

    Re-initialize Camera Functions on 72 R/D Specific Commands Auto/Random Pan on/off 1 Random/Auto Pan on/off 7 Aux 2 on/off 2 Aux 3 on/off 3 Aux 4 on/off 4 Dither on/off 5 Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12...
  • Page 46 55 Note 3 Fast Address Display on 997 Note 3 Fast Address All on 998 Note 3 Fast Address Unassigned on 999 Note 3 Alarm Status on 64 F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.
  • Page 47 Feature applicable only to G3 cameras having firmware equal to or greater than version 2.00 Feature applicable only to G3 cameras having firmware less than version 2.00. Feature applicable only to G3 cameras having firmware greater than version 2.00. Bosch Security System, Inc. User Manual F.01U.080.637 | 1.92 | 2008.12...
  • Page 48 | IntuiKey Keyboard F.01U.080.637 | 1.92 | 2008.12 User Manual Bosch Security System, Inc.
  • Page 50 Phone: +65 6319 3450 Telephone +1 888-289-0096 Fax: +31 40 2577 330 Fax: +65 6319 3499 +1 585-223-9180 emea.securitysystems@bosch.com apr.securitysystems@bosch.com Email: security.sales@us.bosch.com www.boschsecurity.com www.boschsecurity.com www.boschsecurity.us © Bosch Security Systems, Inc. 2008; F.01U.080.637 | 1.92 | 2008.12; Data subject to change without notice.

Table of Contents