Fire Alarm Protection; General; In Case Of Fire; Silencing And Resetting A Fire Alarm - Honeywell 5110XM User Manual

FIRE ALARM PROTECTION

General

Your system may have sensors which detect fire alarm conditions such as smoke detectors,
heat detectors, sprinkler waterflow sensors, etc. Your system monitors these sensors 24
hours a day and provides a number of indications when a fire alarm condition is detected.

In Case Of Fire

WHEN A FIRE ALARM CONDITION IS DETECTED, EVACUATE ALL
OCCUPANTS FROM THE PREMISES IMMEDIATELY AND NOTIFY YOUR
LOCAL FIRE DEPARTMENT.
Your system provides the following indications when a fire alarm condition is detected:
The control's buzzer and keypad buzzer produces a slow on/off pulsing sound.
•
•
The external fire alarm sounders produce either a steady sound or temporal pulsing
sound depending on what your installer selected. Check the appropriate box.
STEADY SOUND
• The keypad LCD displays the word "FIRE" (Alpha) or "FIRE ALARM" (Fixed-Word)
along with the number of the zone in alarm.
FIRE O5
FILE ROOM
ALPHA
A fire alarm message is sent to the central station.
•
If your system has a keypad with a FIRE alarm emergency key, then these indications
may be manually triggered by pressing this key for at least 2 seconds, (or the
corresponding key pair), should you become aware of a fire emergency before your
detectors sense the problem.

Silencing and Resetting a Fire Alarm

To silence the control's buzzer, the keypad buzzer and external alarm sounders:
Press the control's SILENCE/RESET button or enter your User Code
followed by the OFF key at the keypad.
The control's "SILENCED" LED lights and the keypad's LCD will display "FIRE ALARM
SILENCED" (Alpha) or "SF" (Fixed-Word) to indicate that a fire alarm condition may still be
present. The Alpha keypad will display the number of the zone in alarm as a Memory of
Alarm indication. The fixed-word keypad alternates the zone number in alarm with the
"SF" display.
TEMPORAL PULSING SOUND
FIXED-WORD
– 7 –