Checking System Memory; Components; Sample Dimm Upgrade Paths - NEC POWERMATE CT 815 Service And Reference Manual

The versatile, corporate standard, desktop computer powermate
Hide thumbs Also See for POWERMATE CT 815:
Table of Contents

Advertisement

Checking System Memory

If you do not know how much memory is installed in the system, check the amount as follows.
On the Windows desktop, point to
1.
With the left mouse button, click
2.
memory (RAM). This is the amount of system memory in your computer.
In Windows 98 or Windows 2000, you can also find the amount of memory by pointing to
, click
Computer

Components

The system board has the following components:
Intel 815E chip set used for AGP, PCI, memory, and peripheral control. The chip set
!
incorporates
— 82815 Graphics and Memory Controller Hub (GMCH)
— 82801BA Enhanced I/O Controller Hub (ICH2)
— 82802AB/AC Firmware Hub (FWH)
— Integrated Audio/Modem Codec 97 Controller
— Dynamic Video Memory Technology (DVMT)
— Communication and Network Riser (CNR) technology
— System Manageability Bus
— 66-MHz and higher system bus capability
Winbond Super I/O controller
!
American Megatrends Inc. (AMI) BIOS in a flash memory device supporting system setup
!
and PCI auto-configuration
32-KB L1 cache integrated on the processor
!
256-KB L2 cache
!
4-6 System Board

Sample DIMM Upgrade Paths

Total Memory*
DIMM 1
64 MB
64 MB
128 MB
64 MB
128 MB
128 MB
256 MB
64 MB
256 MB
128 MB
256 MB
256 MB
512 MB
128 MB
512 MB
256 MB
*The information in this table shows sample DIMM upgrade paths. It does not
represent every combination of DIMMs supported in the system.
My Computer
Properties
and click
Properties,
Performance
DIMM 2
----
64 MB
----
64 MB
128 MB
-
128 MB
256 MB
, and click the right mouse button.
. The General tab shows the random access
.
DIMM 3
----
----
----
128 MB
----
----
256 MB
----
My

Advertisement

Table of Contents
loading

Table of Contents