Air Filter; Briggs & Stratton Engine - Husqvarna EZ4824 Operator's Manual

Air Filter

Briggs & Stratton Engine
1. Loosen screws and remove air filter cover.
2. Remove the filter cartridge by pulling
upwards along the outside edge.
WARNING!
The engine and the exhaust system
become very hot during operation.
Risk for burns if touched.
Allow engine and exhaust system to
cool at least two (2) minutes.
3. Remove the foam filter (precleaner). Clean
the foam filter with mild detergent and water.
Squeeze dry in a clean cloth. Do not oil the
foam sleeve.
4. Tap the paper filter against a fixed surface to
remove dust. If the paper filter is still dirty, it
must be replaced.
5. Wipe clean the inside of air filter housing.
6. Refit the foam filter (pre filter).
IMPORTANT INFORMATION
Do not use compressed air to clean the air
filter.
Do not wash the paper filter.
Do not oil the paper filter.
7. Mount the filter in the air filter housing.
8. Replace the cover over the air filter housing
and secure with screws.
IMPORTANT INFORMATION
Operating the engine with loose or damaged
air cleaner components could allow unfiltered
air into the engine causing premature wear
and failure.
MAINTENANCE
Loosen cover screws
Remove filter
Reinstall filter
8009-406
8019-014
8019-015
39
Husqvarna-