Download  Print this page

Adjustment Of Cutting Height; Safety Precautions - Husqvarna 540 Instruction Manual

Instruction manual
Hide thumbs

Advertisement

DESCRIPTION
1
Upper handles
2
Lower handles
3
Fastening knobs for upper handles
4
Grass catcher
5
Oil filler cap
6
Oil drain plug
7
Deck
8
Adjusting levers for cutting height
9
Spark plug
10
Fuel cap
11
Engine start-grip
12
Rear deflector
13
Throttle lever
ASSEMBLY OF GRASS CATCHER
ASSEMBLY DEFLECTOR
Assembly deflector ,only for the models with this equipment (Fig.C
ASSEMBLY LOWER HANDLES
ASSEMBLY UPPER HANDLES
ASSEMBLY WHEEL
ADJUSTMENT OF HANDLES
MULCHING CAP INSERTION
To cut the grass with the mulching system (no grass collection), lift the rear deflector panel and insert the cap
by fixing it with the spring as shown in the figure.

ADJUSTMENT OF CUTTING HEIGHT

SAFETY PRECAUTIONS

 Always operate with the deflector or grasscatcher in the correct position.
 Always stop the engine before removing the grasscatcher or adjusting the height of cut.
 Never place your hands or feet underneath the deck or into the grass discharge chute while
the engine is running.
Before mowing, remove all foreign objects from the lawn
which may be thrown by the machine. While mowing,
stay alert for any foreign objects which may have been
missed.
(if not already assembly)
(if not already assembly)
(for the models where it is included only)
(for the models where it is included only)
14
Engine stop lever
15
Reduction gear
16
Console
17
Ignition key
18
Clutch lever
19
Blade engagement lever
20
Handle advance speed
21
Fuel-enrichment pump
)
VII
Never lift the rear of the mower while starting the engine
or during normal operation.
Never place your hands or feet underneath the deck or into
the rear discharge chute while the engine is running.
ENGLISH -
3

Advertisement

loading