Displaying Text Information - Pioneer DEH-3200UB Operation Manual

Cd rds receiver
Hide thumbs Also See for DEH-3200UB:
Table of Contents

Advertisement

Operating this unit
Ejecting a CD/CD-R/CD-RW
* Press 0 (eject).
Playing songs on a USB storage device
1. Open the USB connector cover.
2. Plug in the USB storage device using a USB cable.
Stop playing a USB storage device
* You may disconnect the USB storage device at anytime.
Playing songs on an SD memory card
1. Remove the front panel.
2. Insert an SD memory card into the SD card slot.
Insert it with the contact surface facing down and press the card until it clicks and
completely locks.
3. Re-attach the front panel.
4. Press SRC/OFF to select SD as the source.
Playback will start.
Stop playing an SD memory card
1. Remove the front panel.
2. Press the SD memory card until it clicks.
The SD memory card is ejected.
3. Pull out the SD memory card.
4. Re-attach the front panel.
Selecting a folder
* Push M.C. up or down.
Selecting a track
* Push M.C. left or right.
Fast forwarding or reversing
* Push and hold M.C. left or right.
Returning to root folder
* Press and hold BAND/ESC.
Switching between compressed audio and CD-DA
* Press BAND/ESC.
Notes
• When playing compressed audio, there is no sound during fast forward or reverse.
• USB portable audio players that can be charged via USB will be recharged when plugged in
and the ignition switch is set to ACC or ON.
• Disconnect USB storage device from unit when not in use.
• If plug and play is on and a USB storage device is present, depending on the type of device,
the source may switch to USB automatically when you turn on the engine. Please change
plug and play setting as necessary. Refer to "USB PnP (plug and play)" on page 18.

Displaying text information

Selecting the desired text information
* Press
/DISP/SCRL.
CD TEXT discs: Track number and play time – disc title – disc artist name – track title
– track artist name
WMA/MP3/AAC: Play time – folder name – file name – track title – artist name – album
title – genre – comment – bit rate – folder and track numbers
WAV: Play time – folder name – file name – track title – artist name – album title –
genre – comment – sampling frequency – folder and track numbers
Scrolling the text information to the left
* Press and hold
/DISP/SCRL.
Notes
• Incompatible text stored with the audio file may not be displayed or may be displayed
incorrectly.
• Depending on the version of iTunes used to write MP3/AAC files onto a disc, comment
information may be incorrectly displayed.
• When Windows Media Player 11 is used to encode the WAV files, text information can be
displayed.
• When playing back VBR (variable bit rate)-recorded WMA files, the average bit rate value is
displayed.
• When playing back VBR (variable bit rate)-recorded MP3 files, VBR is displayed instead of
bit rate value.
• When playing back VBR (variable bit rate)-recorded AAC files, the average bit rate value is
displayed. However, depending on the software used to decode AAC files, VBR may be
displayed.
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Deh-4200sd

Table of Contents