Important User Guidance Information - Pioneer PDP-435FDE Operating Instructions Manual

01

Important User Guidance Information

In order to obtain maximum enjoyment from this Pioneer
PureVision PDP-435FDE Plasma Display System, please first
read this information carefully.
With the Pioneer PureVision PDP-435FDE, you can be assured
of a high quality Plasma Display System with long-life and
high reliability. To achieve images of exceptional quality, this
Pioneer Plasma Display System incorporates state-of-the-art
design and construction, as well as very precise and highly
advanced technology.
Over the course of its lifetime, the luminosity of the Pioneer
PDP-435FDE Plasma Display System will diminish very slowly,
such as with all phosphor-based screens (for example, a
traditional tube-type television). To enjoy beautiful and bright
images on your Pioneer Plasma Display System for a long
time, please carefully read and follow the usage guidances
below:
Usage guidelines
All phosphor-based screens (including conventional tube-type
televisions) can be affected by displaying static images for a
prolonged period. Plasma Display System's are no exception
to this rule. After-image and permanent effects on the screen
can be avoided by taking some basic precautions. By follow-
ing the recommendations listed below, you can ensure longer
and satisfactory results from your plasma:
• Whenever possible, avoid frequently displaying the same
image or virtually still moving pictures (e.g. closed-cap-
tioned images or video game images which have static
portions).
• Do not display Teletext for a prolonged period of time.
• Avoid viewing the On Screen Display for extended periods,
from a decoder, DVD player, VCR and all other components.
• Do not leave the same picture freeze-framed or paused
continuously over a long period of time, when using the still
picture mode from a TV, VCR, DVD player or any other
component.
• Images which have both very bright areas and very dark
areas side by side should not be displayed for a prolonged
period of time.
• When playing a game, the "GAME" mode setting within "AV
Selection" is strongly recommended. However, please limit
its use to less than 2 hours at a time.
• After playing a game or displaying any still image, it is best
to view a normal moving picture in the "WIDE" or "FULL"
screen setting for more than 3 times the length of the
previous still moving image.
• After using the Plasma Display System, always switch the
display to "STANDBY" mode.
Installation guidelines
The Pioneer PureVision PDP-435FDE Plasma Display System
incorporates a very thin design. To ensure safety, please take
the proper measures to mount or install the Plasma Display,
in order to prevent the unit from tipping over in the event of
vibration or accidental movement.
6
En
This product should be installed by using only parts and
accessories designed by PIONEER. Use of accessories other
than the PIONEER stand or installation bracket may result in
instability, and could cause injury. For custom installation,
please consult the dealer where the unit was purchased. To
ensure correct installation, experienced and qualified experts
must install the unit. PIONEER will not be held responsible
for accident or damage caused by the use of parts and
accessories manufactured by other companies.
To avoid malfunction and overheating, make sure that the
vents on the main unit are not blocked when installing to
ensure proper heat emission:
• Distance the unit slightly from other equipment, walls, etc.
For the minimum space required around the unit, see page
15.
• Do not fit the unit inside narrow spaces where ventilation is
poor.
• Do not cover with a cloth, etc.
• Clean the vents on the sides and rear of the unit to remove
dust build-up, by using a vacuum cleaner set to its lowest
suction setting.
• Do not place the product on a carpet or blanket.
• Do not leave the product tilted over except the case of
vertical installation of the Media Receiver.
• Do not reverse the product.
Using the unit without proper ventilation may cause the
internal temperature to rise, and could result in possible
malfunction. When the surrounding or internal temperature
exceeds a certain degree, the display will automatically power
off in order to cool the internal electronics and prevent
hazardous occurrences.
Any malfunction may occur due to: an inappropriate installa-
tion site, improper assembly, installation, mounting, or
operation of this product, modifications made to the product.
However, PIONEER cannot be held responsible for such
accidents or malfunction.
Typical effects and characteristics of a phosphor-based matrix
display, e.g., permanent residual images upon the phosphor
of the panel, and the existence of a minute number of inactive
light cells in the screen, are not covered by local warranties.