Lcd Display; Basic Operations; Turning The Unit On And Selecting A Source; Adjusting The Volume - Pioneer DEH-1900R Operation Manual

Section
02 Operating this unit

LCD display

3 5
4
1 Main display section
Shows the various information such as
band, play time, and other setting.

! Tuner

Band and frequency are displayed.
! RDS
Program service name, PTY information
or frequency is displayed.
! Built-in CD Player
Erapsed play time is displayed.
! Audio and initial setup
Function names and setup status are dis-
played.
2 Preset number/track number indicator
Shows the track number or preset number.
! If a track number 100 or more is selected,
d on the left of the track number indica-
tor will light.
3 AF indicator
Shows when AF (alternative frequencies
search) function is on.
4 TP indicator
Shows when a TP station is tuned in.
5 TA indicator
Shows when TA (traffic announcement
standby) function is on.
6 RPT indicator
Shows when repeat play is turned on.
7 LOUD indicator
Appears in the display when loudness is
turned on.
6
En
1
6 7 8
8 Stereo (5) indicator
Shows when the selected frequency is
being broadcast in stereo.
2
9 LOC indicator
Shows when local seek tuning is on.
9

Basic Operations

Turning the unit on and
selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 9).
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Tuner—Built-in CD player
Notes
! When no disc has been set in the unit, the
source will not switch to the built-in CD player.
! When this unit's blue/white lead is connected
to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when
this unit's source is turned on. To retract the
antenna, turn the source off.

Adjusting the volume

% Use VOLUME to adjust the sound level.

Turning the unit off

% Press SOURCE and hold until the unit
turns off.
Tuner

Listening to the radio

1 Press SOURCE to select the tuner.