OR
If the connecting process is immediately following the
pairing process and the connecting process fails to
complete within the 6 seconds, the radio sounds a
decremental-pitched tone to indicate unpaired. The display
shows <Device Type> UNPAIRED. Repeat step 1 to re-
initiate the pairing process.
Indicating the Bluetooth Connection is Lost
a
The radio shows
when the devices have a Bluetooth
connection. Below is the scenario and radio indications when
the connection is interrupted.
Procedure:
1
The Bluetooth icon starts blinking for 10 seconds. The radio
sounds an decremental-pitched tone and the display shows
<Device Type> alternates with CON LOST.
2
If the Bluetooth device successfully re-connects before the
Bluetooth Drop Timer expires, the display shows momentary
<Device Type> CONNCTED, and
OR
If the Bluetooth device fails to re-connect within 10 seconds,
a
the blinking
is replaced by a persistent
Procedure:
1
2
Procedure:
1
2
a
shows persistently.
Procedure:
b
.
With the Bluetooth audio device connected to the radio:
1
Turning the Bluetooth Audio On (Routing the
Audio from the Radio to the Headset)
Press the preprogrammed button to route the audio from the
radio to the headset.
A short, medium-pitched tone sounds. The display shows
HDSET ON.
Turning the Bluetooth Audio Off (Routing the
Audio from the Headset to the Radio)
Press the preprogrammed button to route the audio from the
headset to the radio.
A short, medium-pitched tone sounds. The display shows
SPKR ON.
Adjusting the Volume of the Radio from Bluetooth
Audio Device
Adjust volume up/down on the bluetooth audio device.
53
English