Replacing The Doors - GE Profile 200D2600P039 Owners And Installation Manual

8 REMOVE THE
REFRIGERATOR DOOR (cont.)
D Lift the refrigerator door up and off the
bottom hinge.
If the refrigerator has a refreshment
center, one person should slowly lift the
door up and off the bottom hinge and the
second person should carefully guide the
electrical lines (harnesses) through the
bottom hinge.
90°
Refreshment Center Models Only
E Set the door on a non-scratching surface
with the inside up.
Installation Instructions
27
9

REPLACING THE DOORS

To replace the doors, simply reverse
steps 3 through 8.
However, please note the following:
• When lowering the doors onto the
bottom hinges, make sure the second
person carefully guides the tube and
harnesses through the holes in the
hinges.
• When connecting the water line, make
sure you insert the tubing all the way
to the mark.
• Do not pinch the tubing and harnesses
when placing the doors on the bottom
hinges.
• When connecting the power line and
the electrical lines (refreshment center
models only), be sure that the
connectors are seated together fully.
Mark