Whirlpool ESTATE TES325E W Service Manual page 55

10. With the hinge arm in the "broil stop" position,
install the new hinge assembly in the oven
door liner. Insert the arm into the slot, and
rotate the assembly into position. Hook the
tab at the top of the assembly into the slot in
the door liner, and secure the bottom with two
screws.
DOOR
INSULATION
INSULATION
RETAINER
HINGE
ASSEMBLY
BOTTOM TRIM
HINGE
ARM
DOOR
LINER
REMOVE
BOTTOM TRIM
THIS SCREW
BOTTOM VIEW
GLASS FRAME
RIGHT SIDE
TRIM
BOTTOM TRIM
SIDE TRIM
SCREW (3)
Cooking Products Service Manual
Original July, 1996
© 1996 Whirlpool Corporation
11. Using the bottom of your shoe, press down on
the hinge assembly arm that you just in-
stalled, and insert the screw or nail into the
hole in the arm.
12. Reassemble the rest of the door and install it
on the range.
INNER GLASS
HINGE
ASSEMBLY
3-27
4321893
Page 3-27
DOOR LINER
LINER
PLATE
INNER DOOR
GLASS
WINDOW SEAL