Table of Contents
Advertisement
REMOVING AN OPEN COIL ELEMENT
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electrical
shock.
CAUTION: When you work on the electric range,
be careful when handling the sheet metal parts.
Sharp edges may be present, and you can cut
yourself if you are not careful.
1.
Turn off the electrical supply to the range.
2.
Make sure that the coil elements are cool
before you handle them.
3.
Push and lift the defective coil element and
unplug it from the connector block, then plug
in the new element.
& CONNECTOR BLOCK
3-14
4.
If you are replacing a connector block, re-
move the drip pan from the maintop for the
defective connector block.
5.
Remove the screw from the defective connec-
tor block and lay the blocks on the burner box.
SCREW
6.
Disconnect the connector block wires from
the element control terminals and untape the
wires from the main harness.
7.
Install the new connector block and retape the
wires to the main harness.
8.
Reassemble the range.
CONNECTOR
BLOCK
Hide quick links:
Advertisement
Table of Contents
