Soak - Miele W 2104 Operating Instructions Manual

Soak

A length of time of between 30 minutes
and 2 hours can be programmed in 30
minute increments for the soak
process.
If the soak option is pressed the
selected soak time will be carried out
for the period selected before the wash
programme is run.
The machine is set as standard to a two
hour soak time.
Follow steps A to G to programme
and store in memory.
The programmable functions are
activated to call up further features not
shown on the control panel by using the
additional option buttons in
combination with the programme
selector.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed.
– The programme selector is at Finish .
Programmable functions
A Press the Start button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the machine on with the
I-On/0-Off button.
C Wait until the Start indicator light
comes on . . .
D . . . and then release the Start
button.
E Turn the programme selector to the
Minimum iron 60°C position:
The Soak/Pre-wash sequence
indicator light will briefly flash once
every 2 seconds, to show that a soak
time of 2 hours is stored in memory.
F Each subsequent press on the Start
button selects a different setting.
If the Soak/Pre-wash sequence
indicator light:
– flashes x 1 = the soak time is
2 hours
– flashes x 2 = the soak time is
1 hour 30 minutes
– flashes x 3 = the soak time is
1 hour
– flashes x 4 = the soak time is
30 minutes
G Switch the washing machine off with
the I-On/0-Off button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
61