AEG PROTECT C. 1000 (S) Operating Instructions Manual page 24

Comments:
1. Mains connection (UPS input)
2. Mains input circuit breaker
3. Load connections (UPS outputs)
PROTECT C. 3000 (S) with additional load
connection (IEC 320-16A)
4. Connection for external battery module
5. Data interface for telephone, modem fax (RJ11)
or 10/100 MBit/s network (RJ 45)
6. Vent (Attention: At least 10 cm of free area are
required behind the vent for free ventilation!)
7. Communication interface RS232
(9-pin SUB-D socket)
8. Communication slot for optional expansion cards:
SNMP, USB, AS/400
9. Outlet 16A (only for PROTECT C. 3000 (S))
10. 2 circuit breaker for a pair of non-heating outlet
appliance connectors (only PROTECT C. 3000 (S))
24