Safety Instructions; Personal Protective Equipment; Machine's Safety Equipment - Husqvarna 128CD Owner's Manual

Owners manual
Hide thumbs Also See for 128CD:
Table of Contents

Advertisement

Personal protective equipment

IMPORTANT! Whenever you use a clear-
ing saw, brushcutter or trimmer you must
wear personal protective equipment that is
approved by the authorities. Personal
protective equipment does not eliminate
the risk of accidents, but it can reduce the
effects of an injury in the event of an acci-
dent. Ask your dealer for help when
choosing protective equipment.
WARNING:
ing signals or shouts when you are
wearing hearing protection. Always
remove your hearing protection as
soon as the engine stops.
GLOVES
Gloves should be worn when necessary,
e.g., when fitting cutting attachments.
HEARING PROTECTION
Wear hearing protection that provides
adequate noise reduction.
EYE PROTECTION
Always wear approved eye protection. If
you use a visor then you must also wear
approved protective goggles. Approved
protective goggles must comply with
standard ANSI Z87.1.
BOOTS
Wear sturdy, non- -slip boots.
CLOTHING
Wear clothes made of a strong fabric and
avoid loose clothing that can catch on
twigs and branches. Always wear heavy,
long pants. Do not wear jewelry, shorts
sandals or go barefoot. Secure hair so it is
above shoulder level.
115275126 Rev. 1 9/15/09

SAFETY INSTRUCTIONS

Listen out for warn-
FIRST AID KIT
Always have a first aid kit nearby.

Machine's safety equipment

This section describes the machine's safe-
ty equipment, its purpose, and how checks
and maintenance should be carried out to
ensure that it operates correctly. See the
"Know your trimmer " section to locate
where this equipment is positioned on your
machine.
The life span of the machine can be reduced
and the risk of accidents can increase if
machine maintenance is not carried out
correctly and if service and/or repairs are not
carried out professionally. If you need further
information please contact your nearest ser-
vicing dealer.
WARNING:
that has faulty safety equipment!
Carry out the inspection, mainte-
nance and service routines listed in
this section.
Throttle lock- -out
The throttle lock- -out is designed to prevent
accidental operation of the throttle control.
When you press the lock- -out (A) (i.e. when
you grasp the handle) it releases the
throttle control (B). When you release the
handle the throttle control and the throttle
lock- -out both move back to their original
positions. This movement is controlled by
two independent return springs. This ar-
rangement means that the throttle control is
automatically locked at the idle setting.
A
Stop switch
Make sure the engine stops when you push
and hold the stop switch.
Never use a machine
B
English--- 4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

128ld

Table of Contents