Snow Throwing Tips - Husqvarna 11524E Operator's Manual

Walk-behind snow throwers
Hide thumbs

Advertisement

SNOW THROWING TIPS

Always operate the snow thrower with the engine at
full throttle. Full throttle offers the best performance.
Go slower in deep, freezing or heavy wet snow. Use the
drive speed control, NOT the throttle, to adjust speed.
It is easier and more efficient to remove snow im me-
di ate ly after it falls.
The best time to remove snow is the early morning. At
this time the snow is usually dry and has not been ex-
posed to the direct sun and warming tem per a tures.
Slightly overlap each successive path to ensure all
snow will be removed.
Throw snow downwind whenever possible.
Ad just the skid plates to proper height for current snow
con di tions. See "TO ADJUST SKID PLATES" in this
section of this manual.
For extremely heavy snow, re duce the width of snow
removal by over lap ping previous path and moving
slowly.
Keep engine clean and clear of snow during use. This
will help air flow and extend engine life.
After snow-throwing is completed, allow engine to run for
a few minutes to melt snow and ice off the engine.
Clean the entire snow thrower thoroughly after each
use and wipe dry so it is ready for next use.
WARNING:
thrower if weather conditions im pair
visibility.
heavy, windy snowstorm can blind you
and be hazardous to the safe operation
of the snow thrower.
OPERATION
Do not operate snow
Throwing snow dur ing a
14

Hide quick links:

Advertisement

loading

  Related Manuals for Husqvarna 11524E