Crate EL-10G Owner's Manual

Electra series

Download this manual

GUITAR AMPLIFIER

OWNER'S MANUAL

Congratulations!

You are now the proud owner of the compact Crate EL-10G Electra

Series Guitar Amplifier. The EL-10G features built-in overdrive circuitry,

three bands of equalization, an insert jack and a jack for headphones.

In order to get the most out of your new amplifier, we strongly urge

you to go over the information contained in this manual before you begin

playing.

And thank you for choosing

Need help?

Do you have a question about the EL-10G and is the answer not in the manual?

Page 1 GUITAR AMPLIFIER OWNER’S MANUAL Congratulations! You are now the proud owner of the compact Crate EL-10G Electra Series Guitar Amplifier. The EL-10G features built-in overdrive circuitry, three bands of equalization, an insert jack and a jack for headphones. In order to get the most out of your new amplifier, we strongly urge you to go over the information contained in this manual before you begin playing.
Page 2 EL-10G Electra Series Guitar Amplifier 1: INPUT: Connect your guitar here using a shielded instrument cable. 2: OVERDRIVE BOOST: Increases the output volume and adds “crunch” to your sound. This control is only active when the Overdrive Gain control (#3) is turned on. For more information please see the “Getting Your Sound”...
Page 3 Use Crate’s STP201, STP202 or STP203 will help you get the sound you’re looking for. stereo-to-mono Y-cord or an adapter such as Crate’s YPP117 and 2 1/4” mono signal Clean Sounds: Keep the Gain control “off” cables to connect to the effect as shown: (the Boost control will be inactive).
Page 4 "UNBEDINGT IN DER BEDIENUNGSANLEITUNG NACHSCHLAGEN" EXPLICATION DES SYMBÔLES GRAPHIQUES: "GEFAHLICHE SPANNUNG" Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this Crate manual are subject to change without notice. www.crateamps.com...