Download  Print this page

How To Connect Electricity - GE 197D4613P004 Owner's Manual And Installation

General electric beverage center and wine chiller owner's manual and installation
Hide thumbs

Advertisement

Table of Contents

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
For personal safety, this appliance must be properly grounded.
The power cord of this appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall outlet
to minimize the possibility of electric shock hazard
from this appliance.
Have the wall outlet and circuit checked by
a qualified electrician to make sure the outlet
is properly grounded.
If you have only a standard 2-prong wall outlet,
it is your personal responsibility and obligation
to have it replaced with a properly grounded
3-prong wall outlet.
The beverage center/wine chiller should always
be plugged into its own individual electrical outlet
which has a voltage rating that matches the
rating plate.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
This provides the best performance and also
prevents overloading house wiring circuits which
could cause a fire hazard from overheated wires.
Never unplug your beverage center/wine chiller
by pulling on the power cord. Always grip plug
firmly and pull straight out from the outlet.
Immediately repair or replace all power cords
that have become frayed or otherwise damaged.
Do not use a cord that shows cracks or abrasion
damage along its length or at either end.
When moving the beverage center/wine chiller
away from the wall, be careful not to roll over
or damage the power cord.
ge.com
3

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for GE 197D4613P004

This manual is also suitable for:

Gvs04bdwss