Installing The Scanner - Fujitsu fi-6670 Getting Started Manual

Image scanner
Hide thumbs Also See for fi-6670:
Table of Contents

Advertisement

2

Installing the Scanner

The following describes how to install the scanner.
1
2
3
1) Holding the handle, lift open the Document Cover.
2) Remove the ADF Lock Screws, and then set them to the Lock Screw Storage Holes.
Place the scanner at its installation site.
The outer dimensions and the spaces required for installing the respective scanner types are as
follows:
ADF type
432 (17.0)
686
329
(27.0)
(13.0)
1179
(46.4)
Unlock the Transport Lock (Flatbed type only).
Using a coin or similar, rotate the Transport Lock counterclockwise by 90 degree to unlock it.
Adjust the position of the ADF (Flatbed type only).
Flatbed type
390 (15.3)
300 (11.8)
700
500
(19.6)
(27.5)
4
(Unit: mm/inches)
640 (25.1)
342
(13.4)
690 (27.1)
1030 (40.5)
Outer dimensions
Installation space

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fi-6770Fi-6750s

Table of Contents