Non-Data Commands - Hitachi 7K320 - Travelstar Mobile Hard Drive Specifications

 Security Set Password
 Security Unlock
 Set Max Set Password
 Set Max Unlock
 S.M.A.R.T Write Log Sector
 Write Buffer
 Write Log Ext
 Write Multiple
 Write Multiple Ext
 Write Sector(s)
 Write Sector(s) Ext
Execution includes the transfer of one or more 512 byte (>512 bytes on Write Long) sectors of data
from the host to the device.
If the device detects an invalid parameter, then it will abort the command by setting BSY=0, ERR=1,
ABT=1.
If an uncorrectable error occurs, the device will set BSY=0 and ERR=1, store the error status in the
Error Register. The registers will contain the location of the sector in error. The errored location will
be reported with CHS mode or LBA mode. The mode is decided by mode select bit (bit 6) of Device
register on issuing the command.

13.3 Non-Data Commands

These commands are:
 Check Power Mode
 Device Configuration Freeze Lock
 Device Configuration Restore
 Execute Device Diagnostic
 Flush Cache
 Flush Cache Ext
 Format Unit
 Idle
 Idle Immediate
 Idle Immediate with Unload option
 Initialize Device Parameters
 Read Native Max Address
 Read Native Max Address Ext
 Read Verify Sector(s)
 Read Verify Sector(s) Ext
 Recalibrate
 Security Erase Prepare
 Security Freeze Lock
 Seek
 Sense Condition
 Set Features
 Set Max Address
 Set Max Address Ext
 Set Max Lock
 Set Max Freeze Lock
 Set Multiple Mode
 Sleep
 S.M.A.R.T. Disable Operations
 S.M.A.R.T. Enable/Disable Attribute Autosave
 S.M.A.R.T. Enable/Disable Automatic Off-line
 S.M.A.R.T. Enable Operations
 S.M.A.R.T. Execute Off-line Immediate
 S.M.A.R.T. Return Status
 S.M.A.R.T. Save Attribute Values
 Standby
 Standby Immediate
Page 70 of 176
7K320 (SATA) OEM Specification