Recalling Equalizer Curves; Adjusting Equalizer Curves; Adjusting 16-Band Graphic Equalizer - Pioneer DEH-P88RSII Operation Manual

Audio Adjustments

Recalling equalizer curves

The equalizer lets you adjust the equalization
to match the car's interior acoustic character-
istics as desired.
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
Powerful Powerful
Natural
Natural
Vocal Vocal
Flat Flat
Custom 1 Custom 1
Custom 2 Custom 2
Super Bass Super bass
! Custom 1 and Custom 2 are adjusted
equalizer curves that you create. Adjust-
ments can be made with a 16-band graphic
equalizer.
! When Flat is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat and a set equalizer curve.
% Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizers:
Super Bass—Powerful—Natural—Vocal—
Flat—Custom 1—Custom 2

Adjusting equalizer curves

The factory supplied equalizer curves, with the
exception of Flat, can be adjusted to a fine de-
gree (nuance control).
1 Use MULTI-CONTROL to select EQ 1.
EQ 1 appears in the display.
2 Push MULTI-CONTROL left or right to
select an equalizer curve.
3 Push MULTI-CONTROL up or down to
adjust the equalizer curve.
Each time MULTI-CONTROL is pushed up or
down, the equalizer curve increases or de-
creases respectively.
+6 to –6 is displayed as the equalizer curve is
increased or decreased.
# The actual range of the adjustments are differ-
ent depending on which equalizer curve is se-
lected.
# The equalizer curve with all frequencies set to
0 cannot be adjusted.
Adjusting 16-band graphic
equalizer
For Custom 1 and Custom 2 equalizer curves,
you can adjust the level of each band.
! A separate Custom 1 curve can be created
for each source. (The built-in CD player and
the multi-CD player are set to the same
equalizer adjustment setting automati-
cally.) If you make adjustments when a
curve other than Custom 2 is selected, the
equalizer curve settings will be memorized
in Custom 1.
! A Custom 2 curve can be created common
to all sources. If you make adjustments
when the Custom 2 curve is selected, the
Custom 2 curve will be updated.
1 Recall the equalizer curve you want to
adjust.
See Recalling equalizer curves on this page.
2 Use MULTI-CONTROL to select EQ 2.
EQ 2 appears in the display.
Section
12
65
En